NJP-800 Fully Automatic Hard Capsule Filling Machine
Home / Pharmaceutical Products / Pharmaceutical Machinery / Capsule Filling Machine / NJP-3200C Fully Automatic Hard Capsule Filling Machine
NJP-3200C Fully Automatic Hard Capsule Filling Machine
It is an intermittent full automatic capsule filling machine with multiple tamping stations, precise design and stable performance.
Following processes are completed: capsule feeding, capsule separating, powderfilling, defective capsule rejecting, capsule closing, finished capsule discharging automatically.
It adopts closed rotary table with ten stations. There are 21 holes in1 row crossing on the module.
Function of machine reaches international advanced standard, which also meets the requirement of GMP, CEand FDA standard. It’s absolutely the most ideal machine for producing capsule products.
Product INTRODUCTION
Performance
(1) Output: 3200pcs/min
(2) Change speed by transducer, PLC control(C type)
(3) Easy to operate and install
(4) Function for filling powder, pellet, granule, pellet and pill into capsule.
(5) Automatic detection and diagnosis of lack of material, capsule and mechanical trouble, make alarm and stop automatically.
(6) Displaying in-time speed and accumulative output.
(7) Available for electronic signature and recording, and Industrial Ethernet.
Machine Advantage
1. Closed turret and dosing station,preventing powder come into the turret. Easy to operate, clean and change over the mould.
2. New turret design, adopt 90 linear bearings from Japan, to guarantee machine precision and use life
3. Adopt bigger cam&dosing disk design, enhance the stability of the machine and extend the use life of the machine
4. Equippedwith oil pump forsupply lubricate oil to the cam channel, reduce abrasion and extend use life of the parts
5. Automatic capsule switch, controlled by touch screen via PLC
6. Touch screenwith used-friendly graphic operator panel.
Main Technical Parameter
| Control System | CV & VVVF, PLC Control |
| Overall Dimensions | 1375*1345*(2000+250) mm |
| Weight(KG) | 1500kg |
| Power(KW) | 7.62kw |
| Power Supply | AC 380V; 50Hz |
| Productivity | 3,200pcs/min |
| Sizes of Capsules | 00#～5#&A～E |
| Filling Percentage | ≥99.5％ |
| Noisy | ≤75dBA |
| Dosing Precision | 300mg≤±％ |
| Compressed Air | 0.09m3/min 0.3Mpa |
| Water Supply | Water-sealing Vacuum: with water tank Or with water supply |
| Vacuum | -0.02～-0.06 MPa Q12 |
| Dust Collector | 250L/h |
| Inner Diameter of Inlet Pipe | 20mm |
| Inner Diameter of Outlet Pipe | 27mm |
| Working Temperature | 21℃±3℃ |
| Workshop Height | Manual Feeder:≥2.6m Automatic Feeder:≥2.8m |
| Workshop Humidity | 40～55％ |
| Discharge | 300m3/h |
| Special Function | Can add pellet filling device; powder collector function |
| Machine Material | 304 and 316L Stainless Steel |
Configuration
| Item | Specification/Model No. | Origin | PC/SET |
| Precise Cam Indexes | R140F121502R-CN R140F061202R-CN | SKD,Taiwan | Each 1 pc |
| Main Motor | R47DV100141/2WE | SEW,Germany | 1 pc |
| Vacuum Pump | SK-0.8A ZBV206D | Jianhe | 1pc |
| Dust Collector | 3.0KW | Zhejiang,China | 1pc |
| HMI | TK6070Hi | Taiwan | 1pc |
| Inverter | VFD037E43A | AirTAC | 1pc |
| PLC | DVP-24ES | AirTAC | 1pc |
| Linear Guide | DKNΦ20-60 | Seiko,Japan | 1set |
| Linear Bearing | SDE60Y | Seiko,Japan | 4pcs |
| Linear Bearing | SDE20Y | Seiko,Japan | 16pcs |
| Linear Bearing | SDE16Y | Seiko,Japan | 20pcs |
| Linear Bearing | SDE12Y | Seiko,Japan | 88pcs |
| Needle Bearing | IKDCF20 | Seiko,Japan | 2pcs |
| Needle Bearing | IKDCF12 | Seiko,Japan | 5pcs |
| Thermal Relay | 3UA50 | Siemens,Germany | 3pcs |
| AC Contactor | 3TB44 | Siemens,Germany | 1pc |
| AC Contactor | 3TB42 | Siemens,Germany | 3pcs |
| Breaker | 5SJ63-C32 | Siemens,Germany | 1pc |
| Breaker | 5SJ61-C10 | Siemens,Germany | 1pc |
| Sensor | LJC30A-H-Z/AB2 | Shanghai,China | 1pc |
Wecaps Capsule Filling Machine
Professional and Complete Service SolutionsWecaps offers a wide array of products tailored to meet the specific needs of the food, medicine, and related industries. Our range includes cutting-edge machines like automatic capsule fillers, blister packagers, cartoners, tablet presses, counters, granulators, coaters, and ovens.These machines are equipped with state-of-the-art technology to ensure top-notch performance, simplifying your production processes and effortlessly adjusting to your changing needs.
Global Compliance and CertificationsAt Wecaps, we rigorously comply with regulatory standards in your chosen export destinations.Our machines proudly carry the esteemed CE certification from the European Union, ensuring strict adherence to the highest safety and quality benchmarks. Our packaging equipment production base spans over 12,000 square meters of modern industrial workshop, adhering to stringent SGS and ISO 9001:2015 quality certification management systems.
Delivery & Installation & Commissioning & After-SalesWecaps offers efficient logistics solutions to ensure secure and prompt delivery worldwide.Additionally, our comprehensive after-sales support ensures swift dispatch of highly experienced technicians to promptly address and resolve any hardware faults, providing timely assistance and solutions. We provide ongoing maintenance services to optimize performance, prevent disruptions, and address any evolving needs.
Tailored Solutions For The Pharmaceutical Industry
Wecaps offers customization options to address the specific needs of your production processes. With 40 years of experience in the pharmaceutical sector, we can offer comprehensive turn-key solutions encompassing evaluation, design, installation, commissioning, and ongoing maintenance tailored specifically for the pharmaceutical industry. Opt for our comprehensive pharmaceutical solutions to bolster your success in the pharmaceutical industry.
Online Message
